7
Calibrate the Counterbalance System
Before making any adjustments to the tension, check to see if an adjustment is needed.
After you have installed all of your peripherals (ie. laptop on surface and/or you have installed your
monitor(s), keyboard and mouse), test the balance of the surface. By grabbing both side edges of the
work surface you should be able to seamlessly raise and lower the platform.
If the work surface holds its position after you move it — meaning that you don’t feel the platform
attempting to raise or lower on its own — then no tension adjustment is needed.
If the surface does move upward or downward after you change position, then refer to the information
steps below:
Scenario A
and
Scenario B
Scenario A:
Surface lowers on its own or lowers when you
place your hands on the keyboard.
Using the 6mm hex key, turn the adjustment
screw at the top of the column clockwise until
the platform holds position and feels balanced
while raising and lowering the work surface.
Scenario B:
Surface raises on its own or is difficult to lower.
Using the 6mm hex key, turn the adjustment
screw at the top of the column counterclockwise
until the platform holds position and feels balanced
while raising and lowering the work surface.
Summary of Contents for QuickStand Eco
Page 2: ...QSE 1 0 Base with sloped edges QSE 1 5 Base with flat edges ...
Page 29: ...29 ...
Page 30: ...30 ...
Page 31: ......
