5
humantouch.com
4
Chair Base
Head Pillow
Your Human Touch massage chair requires some assembly.
But
don’t worry, it’s easy! Just attach the remote holder, armrests, seat
cushion, shoulder panels, and head pillow, and you’re set to go!
ENGLISH
1. Gently raise the backrest to an upright position.
1. Place one of the armrests into position, aligning
the tube toward the front of the armrest with the
corresponding hole in the chair base.
IMPORTANT
- If you are
installing the left-hand armrest,
make sure the air hose located
on the left-hand side of the
seat is out of the way before
installing the armrest to avoid
damaging the hose.
4. Repeat steps 1 through 3 to install the other armrest.
2. Push the armrest firmly downward.
NOTE:
If the armrest won’t push all the way downward, wiggle it slightly side to side
—
there is a
post toward the middle of the armrest that must align with a hole in the chair for the armrest to
install properly.
3. Using the provided Allen wrench, install three of the
provided Allen screws into the inside of the armrest to
secure it.
get
ready
Unpack the box
Armrests (2)
Shoulder panels (2)
Remote holder
Allen wrench & 6 screws
ATTACH THE REMOTE HOLDER
INSTALL THE ARMRESTS
2. Attach the remote holder to the chair frame using the hook-and-loop fasteners.
Chair frame
Remote holder
Armrest
Tube
Armrest
Air hose
