OPERATING MANUAL – ENGLISH
BRAKE USAGE/ADJUSTMENT
LOCK THE BRAKE
by pushing down on the handle (for loop
handle, push down on the ball located at the end of the
handle). The handle will lock into a downward position when
properly engaged.
RELEASE THE BRAKE
by pulling up on the handle.
BRAKE FOR
SPEED CONTROL
by squeezing on the handle.
IF THE HAND BRAKE IS TOO LOOSE
loosen the
Locking Nut
and turn the
Tension Adjustment Screw
CLOCKWISE
.
IF THE HAND BRAKE IS TOO TIGHT
loosen the
Locking Nut
and turn the
Tension Adjustment Screw
COUNTER CLOCKWISE
.
NOTE:
If additional adjustment is required, repeat one full
turn at a time. Once adjusted, make sure the
Locking Nut
is
spun tight against the
Housing
. This will prevent the
Tension
Adjustment Screw
from loosening.
OPENING/FOLDING
PRODUCT INFORMATION
Serial Number
(Located on Right Rear Leg)
Date of Purchase
TO OPEN WALKER
Hold handles and pull in on hand brakes. Raise the walker to rest on the rear wheels.
PUSH DOWN
and forward to open the
walker into the proper walking position.
CAUTION!
Never sit on the seat unless it is
locked into place and the brakes
are in the parked/locked position.
CAUTION!
Do not drop your weight onto the
seat as this may cause damage to
the seat and its components.
PULL UP
on the “Easy Fold” seat
handle to fold walker.
IMPORTANT:
Push down the seat to
ensure that the walker is in the proper
walking position.
HUMAN CARE CANADA
10-155 Colonnade Road
Ottawa, ON K2E 7K1
Phone:- 613.723.6734
Fax:- 613.723.1058
Email: [email protected]
www.humancaregroup.com
NOVA ORTHOPEDIC & REHA
-
BILITATION APPLIANCE., INC.
No. 1098, Feng Chou Rd.,
Sheng Kang Dist.
Taichung City 429, Taiwan,
R.O.C.
