6
Panel
Rear Panel
Figure 1-Video processor rear panel
①
AC power input -
using IEC standard power cable video processor, the input power is 100-240
VAC, 50-60Hz.
②
ideo input
— Input criteria for each interface
。
●
CV1, CV2, CV3 , CV4 CVBS video input, BNC connector, input video support PAL, PAL-M / N,
NTSC, SECAM formats. You can connect DVD players and camcorders.
●
DVI1, DVI2 input, DVI-I standard interface, use the DVI-I or DVI-D cable, the video input format
supports VESA standard.
●
HDMI HD video input, HDMI-A standard interface, support HDMI1.3 standard video inputs and
VESA standards. Used to connect desktop computers and HDMI high-definition player.
●
VGA1, VGA2 video input, using the standard DB-25 connector, supports the VESA standard video
input for connecting a desktop computer, laptop or other VGA video output device.
●
SDI digital video input
，
SDI-LOOP
，
SDI Signal ring out
，
Using BNC interface
，
Enter the video
support HD video camera, etc..
④
video output
- video output interface processor programming
●
DVI output, using the DVI-I connector, the output video format is set by the processor, two DVI
outputs the same signal at the same time. Used to send the card or connected to the LED monitor.
⑦
CH-M/Monitor output
，
using the DVI-I connector
，
Output video to display
，
As a display of the user's
real-time operating image location and switching effects.
⑤
RS-232
- Serial communication connector for engineering testing, the device is programmed, PC
software control, communication baud rate is 115200bps.
③⑥
LED sending card
- LED sending card installation location aside, you can install one or two to
send cards. When installed, the user can first open the back cover and the small bracket, mounting,
internal set aside four 5V power connector, four 2.0x4PIN connectors. After installing the plug 5V
power supply.
