Huidu Technology HDP901, Manual

Page: 15 / 19

15
Steps
：
(1)Turn on PIP, there are two ways to open, one by PIP button, the second is in the menu system
Default Menu → Main Menu → PIP →PIP mode→ PIP
(2).Set the input source, the processor of the main channel and PIP channel, the same type of input
source can not be achieved PIP function, so users can refer to the following table PIP source conflict
table.
Default Menu → Main Menu →PIP → PIP setup →Input
Table 3 - PIP Source conflict table
Main Chanel
CV1 CV2 CV3 CV4 VGA1 VGA2 DVI1 DVI2 HDMI1 HDMI2 SDI
P
I
P
CV1 √ × × × √ √ √ √ √ √ √
CV2 × √ × × √ √ √ √ √ √ √
CV3 × × √ × √ √ √ √ √ √ √
CV4 × × × √ √ √ √ √ √ √ √
VGA1 √ √ √ √ √ × √ √ √ √ √
VGA2 √ √ √ √ × √ √ √ √ √ √
DVI1 √ √ √ √ √ √ √ × √ √ √
DVI2 √ √ √ √ √ √ × √ √ √ √
P
I
P
HDMI1 √ √ √ √ √ √ √ √ √ × √
HDMI2 √ √ √ √ √ √ √ √ × √ √
SDI √ √ √ √ √ √ √ √ √ √ √
(3)Size and position parameters, specific parameters set by the user, the user can also adjust the PIP
border transparency.
Default Menu → Main Menu → PIP→PIP setup→ H Start
Default Menu → Main Menu → PIP→PIP setup→ V Start
Default Menu → Main Menu → PIP→PIP setup→ Width
Default Menu → Main Menu → PIP→PIP setup→ Heigh
Keying
NOTE: When the PIP is enabled, cut and fade function can not be used.