5
Electromagnetic Field
-Electromagnetic fields can interfere with various electrical and electronic devices such as
pacemakers.
-Consult your doctor before using any electric arc welder or cutting device
-Keep people with pacemakers away from your welding area when welding.
-Do not wrap cable around your body while welding.
-Wrap MIG gun and ground cable together whenever possible.
-Keep MIG gun and ground cables on the same side of your body.
Shielding Gas Cylinders Can Explode
High pressure cylinders can explode if damaged, so treat them carefully.
-Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.
-Do not touch cylinder with MIG gun.
-Do not weld on the cylinder
-Always secure cylinder upright to a cart or stationary object.
-Keep cylinders away from welding or electrical circuits.
-Use the proper regulators, gas hose and fittings for the specific application.
-Do not look into the valve when opening it.
-Use protective cylinder cap whenever possible
1.5 Proper Care, Maintenance and Repair
-Always have power disconnected when working on internal components.
- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board in
static proof bag to move or ship.
-Do not put hands or fingers near moving parts such as drive rolls of fan
INVERMIG
III
SERIES USE AND CARE
Do not modify the INVERMIG
III
SERIES in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications for
which the
INVERMIG
III
SERIES
was designed.
Always check of damaged or worn out parts before using the INVERMIG
III
SERIES.
Broken
parts will affect the
INVERMIG
III
SERIES
operation. Replace or repair damaged or worn parts
immediately.
Store idle INVERMIG
III
SERIES.
When
INVERMIG
III
SERIES
is not in use, store it in a secure
place out of the reach of children. Inspect it for good working condition prior to storage and before
re-use.
