14
5.3 Control Panel GUI
1. Current indication
2. Voltage indication
3. Main power indicator (Green)
4. Protection indicator
（
Red
）
5. Working indicator (red)
6. MIG mode selection button
7. MIG parameter adjustment selection button:
is manual.
is unified, user can adjust welding
currents and the voltage will matching automatic in unified mode, and the arc length is from -30 to 30,
and 0 is recommend.
8. Gas checking
9. Protective gas option button: CO2 or MIX
10.Wire diameter button:φ1.0/φ1.2/φ1.6
（
350-φ0.8/φ1.0/φ1.2
）
11. Welding function button: MMA, MIG/MAG
12. Ending arc current adjustment knob: Under MMA is used for adjustment welding current, under
MIG/MAG is used for ending current (wire speed).
13. Ending arc voltage adjustment knob: Under MMA is used for adjustment arc force, under MIG/MAG
is used for ending voltage.
14. Gas shielded welding electronic reactance adjustment knob
1
2
3
4
5
6
7
8
9
10
11
12
13
14
