Hughes HughesNet Ka-band, Pointing Manual

Page: 36 / 44

Chapter 2 • Pointing the antenna
28
1037663-0001 Revision A
If you press Advance , the DAPT prompts you for
confirmation that you want to save the results, with the
message:
10. Press Advance to save the pointing validation results, or
Back to return to the previous state.
If you press Advance , the DAPT display reads:
11. Press Advance to indicate Yes and complete the pointing
process, or Back to restart pointing validation.
If you press Advance , the DAPT display should read:
This indicates that you have completed the pointing process
successfully. The DAPT displays this message for
approximately 10 seconds, then displays the IFL voltage to
indicate that the pointing process has finished.
Note: Do not disconnect the DAPT until instructed to do so.
Disconnecting the DAPT prematurely could cause a loss of all
stored data, invalidating the entire pointing process. It could
also cause the satellite modem to crash.
Note: Do not disconnect the DAPT until the IFL voltage
appears. Disconnecting the DAPT prematurely could cause a
loss of all stored data, invalidating the entire pointing process.