Hughes HN9500, Installation Manual

Page: 45 / 136

Chapter
5
Commissioning the satellite router
During the commissioning phase of installation the satellite router downloads
software and completes other activities so it can become an operational element
Topics:
• Prerequisites for commissioning
of the network. When commissioning is completed, the router is ready for service
activation.
• Monitoring the commissioning
process
The NOCC and the router communicate to make sure commissioning software
is loaded in the router. If necessary, commissioning software is downloaded to
• Troubleshooting installation
problems
the router. The commissioning software is only sufficient to complete
commissioning steps; it does not support end-user data transfer capabilities.
The router interacts with the satellite to establish transmit timing and
synchronization. It interacts with the NOCC for authentication and registration;
and to obtain required software, security keys, and a preliminary configuration.
The NOCC notifies the NSP that the satellite router has registered with the
network.
The router downloads a temporary configuration from the NOCC. The temporary
configuration allows the router to communicate with the NSP so the broadband
service can be activated. Final configuration is provided to the router after service
activation.
31
HN9500 Satellite Router Installation Guide
1037736-0001 Revision G