Appendix A • Conforming with standards and directives
34
1036332-0001 Revision C
Responsible Party’s name: Hughes Network Systems, LLC
Address: 11717 Exploration Lane, Germantown, MD 20876
Telephone: 1-866-DIRECWAY (347-3292)
Trade Name: HUGHES, DIRECWAY
Type of Equipment: Two-Way DIRECWAY System
Model Numbers: DW7000 and DW7700 (1035660-xxxx)
The Two-Way DIRECWAY System (DW7700 and DW7000)
complies with the Canadian ICES-003, Class B standard.
For DW7700
Standards to which Conformity is declared: FCC Part 68
Part 68 Compliance
-- This equipment (Two-Way DIRECWAY
System: Model Numbers: DW7700) complies with Part 68 of the
FCC rules and requirements adopted by the ACTA. On the rear
panel of this equipment is a label that contains, among other
inforrmation, the product Part Number (P/N) in the format
XXXXXXX-XXXX and an eight digit Electronic Serial Number
(ESN). If requested, this information must be provided to the
Telephone Company.
The Two-Way DIRECWAY system needs to be installed
according to the instructions. Coaxial cables (Rx and Tx) need to
be grounded at the point of entry. A plug and jack used to connect
this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
26 Gauge
telephone cord and modular plug is provided with this product. It
is required to be terminated with a plug type 605 or a FCC plug
type 6 position for Australia.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or
larger UL Listed or CSA Certified Telecommunication Line
Cord.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on the telephone
line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of RENs should
not exceed five (5.0). To be certain of the number of devices that
may be connected to the line, as determined by the total RENs,
contact the local Telephone Company. For products approved
after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:5L4DT##B1032021.
Summary of Contents for DiRECWAY DW7700
