Hudora 14695-02, Instructions On Assembly And Use

Page: 6 / 24

6/24
EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON PURCHASING
THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packag-
ing carefully in case questions arise in the future. Please always include
these instructions when handing on the product to a third party. This prod-
uct must be assembled by an adult. This product is designed for private/
domestic use only. This product is not designed for commercial/industrial
use. The use of the product requires specific skills and knowledge to be
able to avoid injuries due to crashes and collisions. Always adjust accord-
ing to the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: HUDORA BigWheel
®
(Wheel size: 205 mm)
Item number: 14695/02, 14708, 14709, 14724/01, 14738, 14748/01,
14750/01, 14751/01, 14758, 14759, 14764/01, 14774,
14776, 14825, 14826/00, 14844, 14845, 14846/00,
14847/00, 14848, 14849
Dimensions: approx. 88 cm in length, deck approx. 33 x 11.5 cm
Product weight: approx. 4.1 kg
Class: A, 100 kg maximum user weight
Purpose: Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on
the product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Scooter | 1 x These instructions
Other parts which may be included with the delivery in some circum-
stances are not required.
SAFETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear personal
protective equipment. This includes at least: hand/wrist guards, knee
pads, head protection and elbow pads. Never use the scooter without
shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those
which are flat, clean, dry, and use the scooter where possible
away from other road users. Avoid sloping ground. The brakes
may become hot if the scooter has been used for a while! Your foot-
wear could be damaged! The brakes shouldn’t be touched until they
have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are
intact and tight, e.g. the folding mechanism and the height setting of
the handlebar. The functions of self-securing screw threads can be
impaired after repeated loosening and tightening of the connecting
elements. Check especially for the correct alignment and fastening of
the steering set-up.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility. Do not
use it on roads or thorough-fares or on slopes or hills. Avoid being in
the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting ap-
plicable traffic regulations for the intended area of application.
• The use of the product requires specific skills and knowledge to be
able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult super-
vision.
• Ensure when riding that the logo on the handlebar points to the front
or else that the push buttons is as such oriented backwards.
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is delivered in
its transport form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOWS TO GET THE SCOOTER READY FOR USE
• Pull on the lever to the right above the running board to loosen the
transportation lock (Picture 2)
• Unfold the scooter‘s handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you hear
it click into place. (Picture 3)
• Insert the handlebar grips into the T-section of the handlebar stem.
Use your thumbs to press down both locking buttons until the the grips
can be easily pushed into the T-section. Turn the handlebar grips until
the locking buttons are positioned in the two openings intended for
them and you hear them click into place. (Picture 4) Check that both
handlebar grips are fitted correctly by pulling both outwards. If they do
not move, they have been assembled in accordance with the instruc-
tions.
• Loosen the quick release lock on the handlebar rod by pushing the le-
ver of the quick release lock until the lever is parallel to the handlebar
grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights. Pull
the handlebar rod out of the handlebar stem until it is at the required
height and the relevant button has snapped into place. (Picture 6) The
maximum height cannot be exceeded due to the integrated lock. If the
handlebar does not sit firmly at the required height, open the quick
release lock again and turn it a few times so that the fastening bracket
fits more tightly to the handlebar rod. Repeat this process until the
handlebar rod can be aligned securely. (Picture 7)
• Now close the quick release lock by pushing the lever down to the
handlebar stem.
• Always check all parts before use to ensure they are fitting tightly, par-
ticularly the folding mechanism, the handlebar locking and the wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Loosen the quick release lock by pushing the lever of the qucik release
lock away from the handlebar stem.
• Please press the locking button so that the handlebar rod can be
moved. (Picture 6)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the handle-
bar stem.
• Use your thumbs to press both locking buttons in the handlebar grips
and pull the handlebar grips outwards until they are released com-
pletely from the T-section. (Picture 4)
• Push the handlebar grips down until they are parallel with the handle-
bar shaft.
• Pull the lever (to the right above the running board) in order to loosen
the assembly lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back
wheel until you hear the transport lock click into place.