3
©2017 Hubbell Incorporated | Chance
®
Full Range ARVI Operating Instructions
Product Safety
Before and after each use, always test the unit on a known energized voltage source or with the
Voltage Indicator Tester to verify proper operation.
The equipment covered in this manual must be used and serviced only by competently trained
personnel familiar with and following approved work and safety practices. This equipment is for
use by such personnel and this manual is not intended as a substitute for adequate training and
experience in safe procedures for this type of equipment.
These instructions neither cover all details or situations in equipment use, nor do they provide for
every possible contingency to be encountered in relation to installation, operation or maintenance.
Should additional information and details be desired or if situations arise which are not covered
adequately for the user’s purpose, the specifics should be referred to Hubbell Power Systems.
!
WARNING
Always use an appropriate length insulated Hot Stick even when wearing rubber gloves. Contact
with the universal coupling or other parts even with rubber gloves will cause erroneous readings.
Always use with a universal pole to maintain its calibration.
!
WARNING
!
CAUTION
CORRECT USE
INCORRECT USE
Minimum Approach Distances (MAD) should be adhered to at all times. For the latest information
and charts refer to the official OSHA website: https://www.osha.gov
!
DANGER
Do not allow the universal coupling to become grounded in any way, or to contact another
phase as this will cause erroneous readings and could cause severe personal injury or damage to
equipment.
!
WARNING
