Hubbel Chance PSC2080548, Intended Use

Page: 9 / 10

9
PSC2080547 & PSC2080548 Swingarm
FIGURE 12
Retracted position
(shown - PSC2080547 End Mount)
FIGURE 13
Extended position
(shown - PSC2080547 End Mount)
10. Install hose clamp over the bottom strap bracket as shown in FIGURE 11 and secure
11. Extend/Retract swingarm by gripping swingarm handle and pulling spring pin. Fully retracted and extended
positions are shown below in FIGURES 12 & 13.
NOTE: Swingarm was designed to have optional hard stops at 8” or 12” extensions when using the provided
3/8” bolt and lock nut.
FIGURE 11
! WARNING
When retracting equipment from an extended position, ensure handle on outer tube is firmly held while actuating
the spring pin to prevent damage to cables, closure, and/or personal injury.