7 of 12
P805-0011 Rev. A
©
2002 Hubbell Power Systems, Inc., 210 North Allen Street, Centralia, MO 65240 U.S.A.
Wiring
Conductors
• Using your company’s standard practices,
train the conductors to the switch terminal
pads
• Use sufficient conductor length to allow
for ease of termination and switch
operation
Connect High Voltage
Conductors
• Wire brush mating surface of the switch
terminal pads and terminal connectors
• Wire brush connector surfaces where
conductors will be secured
• Wire brush conductor surfaces
• Apply a contact sealing paste to the
cleaned surfaces (A.B. Chance Z.L.N. or
equivalent)
• Assemble connectors, conductors and
hardware to the switch terminal pads
• Ensure bolt heads of the terminal
connectors are on the insulator side of the
terminal pad as shown.
• Torque all supplied hardware to 60 ft-lb.
• Torque user supplied hardware according
to your company standards.
High Voltage Electrical Arc Hazard
May cause property damage.
Install terminal connectors with bolt heads toward the insulator.
Failure to do so may compromise the electrical insulation resulting in
an electrical arc.
CAUTION
