45136
ASSEMBLY & INSTALLATION INSTRUCTIONS
Double Ursa 302507
B427
To Install Lower Glass/Decorative Assembly
(Figure 4)
1. Carefully slide glass (N) into lower decorative as-
sembly (C) until it settles into bottom bracket (P).
It may be necessary to loosen the set screw (O) to
allow glass to drop into the bottom bracket (P).
Note:
Be sure not to drop glass (N) into bottom
bracket as glass could chip from the force.
2.
Using hex wrench (provided), tighten set screw (O)
in bottom bracket (P) until snug against glass (N).
Be sure not to overtighten
.
3. Place lower decorative assembly (C) and glass (N)
up into fixture assembly (A) while aligning bot
-
tom rod (Q) with lower spacer assembly (K) install
screws (U).
4.
If adjustment is needed to hold lower decorative
assembly parallel with wall, loosen adjustment
screw (M), move lower decorative assembly to
desired position and retighten screw.
Note: It is not necessary to completely remove
adjustment screw (M) from lower spacer assembly
(K).
6 OF 8
A
U
K
Q
P
N
C
M
(Figure 4)
O
