45136
ASSEMBLY & INSTALLATION INSTRUCTIONS
Double Ursa 302507
B427
1.
Using diagram in Figure 4, place marks on the wall to locate the upper and lower spacer assemblies (J & K).
Note: Measurements are from the edge of the mounting can of the fixture to the centerline of the spacer.
2.
Remove thumbscrew (L) from upper spacer (J) and set aside for use later.
To Install Upper and Lower Spacers.
(Figure 3)
Note: Upper spacer (J) has a round hole and
Lower spacer (K) has a square hole.
3.
Hold appropriate spacer level on the wall and
using two #10 screws (S) fasten the spacer to
the wall. Repeat for the other spacer.
(Figure 3)
5 OF 8
J
L
A
NOT TO SCALE
NOT TO SCALE
S
S
