18
IX. Paper change method of printer
The operation of replacing the paper roll of the printer is very simple. It does not need to take
out the whole printer. Just press the open button to open the front cover. Open the front cover
as shown in Figure A and take out the remaining paper core. Then install the new paper roll as
shown in Figure B and close the front cover as shown in Figure C.
Note: when closing the front cover, make the printing paper stretch out from the paper outlet, put
it in the middle position, and let the rubber shaft fully press the printing paper, otherwise it can't
be printed. When the thermal printer is loading paper, it must be confirmed that the thermal
coating of the thermal paper is on it, and then put the thermal paper into the printer paper bin. If
the thermal coating is not on
the correct side, no writing will be printed. If the printing paper deviates, you can open the
front cover again and adjust the position of the printing paper.
A How to open the front cover
B
Printer in roll
C
Close the front cover of the printer
