10
3)
Equal amplitude output
The controller will raise the voltage to the set value in several cycles, and the
instrument will output the equal amplitude, as shown in Figure 8. The prompt message
in the status bar is "equal amplitude output".
Figure 8 constant amplitude output of controller prompt
4)
Downtime
When the timing reaches the set time, the instrument will stop automatically, as shown in
Figure 9, and the prompt message in the status bar is "stop the test"
.
Figure 9 controller prompts to stop the test
The instrument stops the high-voltage output and automatically discharges the test object, as shown
in Figure 10. The prompt message in the status bar is "discharging".
