12
Please note: Check photo below, when fix back the one-way valve, please screw it
only a little bit tight will be ok, please do not screw it too tightly, if too tightly, the air
could not get through, so the machine could not start up,
1.5 Check whether air-pump rubber is broken, if it is broken, please change and fix back
appropriately,
1.5 Check whether the rubber O-Ring is lost,
Note: Please note that, inside the hole, there have a black rubber O-Ring, please do
not lost it.
1.6
Use pole to clean the deposited carbon inside fogging tube near by the nozzle, check
below,
