13
FIG 5-11
Test result
Click the "Cool" button to open the cover of the instrument for heat dissipation. If the
test is not successful, the corresponding error prompt window will pop up, and then the
interface as shown in figure 5-10 will be displayed. Click to “Cool”,the cooling process
needs to be stopped manually. In the process of testing, the instrument detects various
faults and prompts the user. The user can take corresponding solutions according to the
fault prompts.
Estimated flash value setting method: When the oil sample flash point is known, the
flash point value of the oil sample can be set as the estimated flash value. When the oil
sample flash point is unknown, the flash point sets the flash point estimated value of the
oil sample, and then the test stops. Then reset the estimated flash value according to the
instrument prompts.
Press the “Exit” button to exit the test state and the test furnace stops any action and
returns to screen 5-7.
The instrument automatically tests the current atmospheric pressure value,
automatically calculates the flash correction value according to the selected execution