Figure 4-17
Removing an SFP+ cable
2.
Connect the new SFP+ cable.
Remove the dust-proof cap on the port, and insert the cable connector into the port. See
NOTE
When you hear a "click" sound and the cable cannot be pulled out, the connector is securely
connected.
Figure 4-18
Connecting an SFP+ cable
Step 6
Check that the new cable is properly connected.
Power on the server, and ping the IP address of the peer device. If the peer device cannot be
pinged, check whether the cable is intact or the connectors are securely connected. If the peer
device cannot be pinged, check whether the cable is intact or the connectors are securely
connected.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
85