manualshive.com logo in svg

Huawei V100R005, User Manual

The Huawei V100R005 Technical White Paper is a comprehensive manual that provides in-depth insights into the features and functionalities of this exceptional product. Available for free download from manualshive.com, this indispensable resource offers valuable information for users seeking a deeper understanding of their Huawei V100R005 experience.

Share
Download
background image

Figure 5-62

 Installing the right mounting ear

Step 9

Install the right mounting ear in the arrow direction. See (2) in 

Figure 5-62

.

Step 10

Tighten the screws. See (3) in 

Figure 5-62

.

Step 11

Connect the mounting ear signal cable to the right mounting ear connector on the mainboard.
See (4) in 

Figure 5-62

.

Step 12

Install the air duct or the built-in drive assembly. For details, see 

3.9 Installing the Air Duct

or 

3.11 Installing the Built-in Drive Assembly

.

Step 13

Install the chassis cover. For details, see 

3.5 Installing the Chassis Cover

.

Step 14

Install the server. For details, see 

4.4 Installing the Server on Guide Rails

.

Step 15

Connect the power cables. For details, see 

5.4 PSU

.

Step 16

Power on the server. For details, see 

3.1 Powering On the Server

.

Step 17

Power on the server and check that the indicators on the right mounting ear indicate no fault.
For details about the indicator location and status, see 

2.2 Front Panel Indicators and

Buttons

.

----End

2288H V5 Server
User Guide

5 Optional Part Installation

Issue 04 (2018-09-04)

Copyright © Huawei Technologies Co., Ltd.

173

Summary of Contents for V100R005







































































































































































































































































































Reviews:

No comments

Related manuals for V100R005

8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Safety Vision ROADRECORDER 8000 User Manual preview
ROADRECORDER 8000
Brand: Safety Vision Pages: 40
E-Tech Wireless Mini PCI Module User Manual preview
Wireless Mini PCI Module
Brand: E-Tech Pages: 42
ekwb EK-FC Installation Manual preview
EK-FC
Brand: ekwb Pages: 2
Velopex Extra-X Quick Start Manual preview
Extra-X
Brand: Velopex Pages: 7
Tandberg Data SUPERLOADER DLT MAGAZINE Quick Start Manual preview
SUPERLOADER DLT MAGAZINE
Brand: Tandberg Data Pages: 6
B&B Electronics 232CC1A Product Information preview
232CC1A
Brand: B&B Electronics Pages: 2
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
Baicells EG2013B-M11 User Manual preview
EG2013B-M11
Brand: Baicells Pages: 10
WABCO CAN Router Manual preview
CAN Router
Brand: WABCO Pages: 29
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
Loopcomm LP-8014 Quick Start Manual preview
LP-8014
Brand: Loopcomm Pages: 2
TP-Link Deco XE200 User Manual preview
Deco XE200
Brand: TP-Link Pages: 57
Delta Electronics PFC Chokes PFC3515V Series Specification Sheet preview
PFC Chokes PFC3515V Series
Brand: Delta Electronics Pages: 1
Tripp Lite N201-001-BL Specification Sheet preview
N201-001-BL
Brand: Tripp Lite Pages: 3
ADTRAN EXPRESS 6503 User Manual preview
EXPRESS 6503
Brand: ADTRAN Pages: 20
RR-Concepts StationMaster Manual preview
StationMaster
Brand: RR-Concepts Pages: 12
Omron G3RV-SL500-A Manual preview
G3RV-SL500-A
Brand: Omron Pages: 14

Brands by name

Popular brands

Load more brands