Powering On/Off
13
2
G
e
tt
in
g
S
ta
rte
d
3
To remove a memory card, open the rubber cap
and press the memory card gently. Now the
memory card will pop up automatically. Then
take it out as shown in the following figure.
Powering On/Off
Powering On
Ensure that the SIM card is in your phone and that
the battery has been charged.
Press and hold
until power is on.
Switching Off
Press and hold
until power is off.
Access Codes
If you have set the phone password and the PIN is
ON
, you have to enter the corresponding access
codes when you power on your phone. For setting
and changing the access codes, please refer to "Set-
tings/Security Settings" on page 101.
◆
Phone Password
The phone password is used to protect your phone
from unauthorized use. The phone password is
preset as 0000 for your mobile phone.
Getting Started.fm Page 13 Friday, December 15, 2006 10:59 AM