4
Configuration (Command Line Mode)
U-SYS IAD101H/102H/104H Integrated Access Device
Quick Start
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-02-09)
TERMINAL(config)#
terminal timeout 255
Step 2
Configure the IP address of the IAD. There are three methods for obtaining the IP
address, that is, Static IP address, DHCP and PPPoE. By default, the IAD obtains an IP
address through DHCP automatically after being connected to the network. You can
choose another method for obtaining the IP address:
z
Run
ipaddress static ip-address subnet-mask default-gateway
to set a fixed IP
address.
z
Run
ipaddress dhcp
to obtain an IP address through DHCP. (A DHCP server is
required.)
z
Run
pppoe username user-name password password
to set the PPPoE user name
and password, and then run
ipaddress pppoe
to obtain an IP address through
PPPoE. (A PPPoE server is required, and the user name and password need to be
set as the same as that on the PPPoE server.)
You can run
display ipaddress
to view the IP address of the IAD.
Changing the IP address may disconnect the Telnet connection. Then, you should establish
the Telnet connection again with the new IP address.
Step 3
Set the registered domain.
Run
mgcp mg-domain-name name
. The
name
of the IAD, which is registered on the
MGC server, is iad001.
TERMINAL(config)#
mgcp mg-domain-name iad001
Step 4
Run the
mgcp mgc index address ip-address
command to configure the MGC server.
For the MGC server, the index is 1, the IP address is 191.168.10.20.
TERMINAL(config)#
mgcp mgc 1 address 191.168.10.20
You can set the
index
to 2 to configure a backup MGC server. The IAD registers to the
MGC server of
index
1; if the registration fails, the IAD registers to the MGC server of
index
2 to ensure the normal running of the service.
Run
display mgcp attribute
to view the configuration result.
Step 5
(Optional) Synchronize the system time with the SNTP server, giving the log and alarm
records accurate time for reference.
Run
sntp server address ip-address
to set the IP address of a SNTP server, and then
run
sntp interval <0-3600>
to set the synchronization interval and run
sntp time-zone
{
+
<
0-13
> |
-
<
1-12
>} to set the time zone (for example, the Bejing time zone is +8,
run
sntp time-zone + 8
).
z
You can set the SNTP server to a PC on which the Windows Time service is
enabled. The PC must work continuously. To check whether the Window Time
service is enabled on a PC, choose
Control Panel
>
Management Tools
>
Services
.
z
If the MGC server can function as an SNTP server, you can set the SNTP server to
the MGC server.
You can run
display sntp
to view the status of the SNTP server.
Summary of Contents for U-SYS IAD101H
Page 2: ......
