Parameter
Value
Remarks
Network Manager
IP address 1
-
Depending on the
actual configuration.
IP address 2
-
Set this parameter as
required.
IP address 3
-
Set this parameter as
required.
The administrator and touch panel user's names cannot be changed. After changing the
passwords, use the new passwords for connections. To implement the unified network
management function of the Service Management Center (SMC),
Account status
must be set
to
Enable
for the API server user, and the SMC IP address must be set in
Network Manager
.
Step 4
Configure 4E1 settings, as shown in
.
NOTE
When 4E1 lines are used for calls, you need to complete the following settings:
l
Choose
Settings
>
General Conference Settings
and set
Dial number type
to
4E1
.
l
Choose
Settings
>
Advanced Settings
and set
Default call type
to
4E1
in
Conference Settings
.
If 4E1 lines are not used on the network, you can skip the following steps for configuring 4E1
settings.
Figure 4-41
4E1 settings
Table 4-28
4E1 settings
Parameter
Value
Remarks
Account
123
Set this parameter as
required.
Password
-
Set this parameter as
required.
HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
4 Parameter Configuration
Issue 01 (2015-02-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
