TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
10 Commissioning
Issue 03 (2014-12-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
Main
Menu
Second-
Level
Menu
Third-
Level
Menu
Fourth-Level
Menu
Default
Value
Setting Value
NetEco Primary
IP
192.168.0.10
Set an IP
address for the
active NetEco
server.
NetEco Backup
IP
192.168.0.10
Set an IP
address for the
standby NetEco
server.
NetEco Port
Number
31220
Set a port for the
NetEco.
----End
10.6.3 Setting Communications Parameters (YDN1363 NMS)
Procedure
Step 1
On the LCD, check that the port mode, protocol type, baud rate and communication address
are the same as the default values in
Table 10-9
Communications parameters
Main
Menu
Second-Lev
el Menu
Third-Leve
l Menu
Fourth-Level Menu
Fifth-Level Menu
Setting
Value
Parameters
Settings
Comm.
Parameters
Serial Port
NOTE
Set
parameters
of
North485bo
und
or
North232bo
und
based
on the actual
communicati
on mode.
North232bound
Port Mode
Manual
Protocol Type
YDN1363
Protocol
North485bound
Port Mode
Manual
Protocol Type
YDN1363
Protocol
YDN1363
Protocol
Baud Rate
-
9600
Comm. Address
-
3
----End