SUN2000 (8KTL-28KTL)
Quick Installation Guide
Issue 04 (2013-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
Figure 1-28
Connecting DC input power cables (2)
1. Positive power cable
2. Negative power cable
Step 5
Insert crimped power cables into corresponding housings until you hear a "click" sound. The
power cables snap into place.
Step 6
Reinstall cable glands on positive and negative connectors and rotate them against the
insulation covers.
Before performing step 7, the DC switch is
OFF
.
Step 7
Insert the positive and negative connectors into corresponding DC input terminals of the
SUN2000 until you hear a "click" sound, as shown in
Figure 1-29
.
Figure 1-29
Connecting DC input power cables (3)
1. Bayonet
----End
8. Connecting RS485 Communications Cables
Step 1
Remove the insulation layer of an appropriate length from the shielded network cable using a
wire stripper.
