Huawei SMU01C User Manual Download Page 43

Page: 43 / 54

SMU01C
User Manual

9 Alarm Management

Issue 03 (2015-01-05)

Huawei Proprietary and Confidential

9.5.6 Batt Over Temp

Possible Causes



Temperature inside the battery compartment exceeds the alarm threshold.



The battery temperature or ambient temperature alarm threshold is not properly set on
the monitoring unit.



The temperature sensor is faulty.

Measures

Lower the temperature inside the battery compartment. The alarm is automatically
cleared after the temperature lowers to a proper range.

Adjust the battery temperature alarm threshold to a proper range.

Replace the faulty temperature sensor.

9.5.7 Batt Under Temp

Possible Causes



The battery temperature alarm threshold is not properly set on the monitoring unit.



The heater is faulty.



The temperature sensor is faulty.

Measures

Adjust the battery temperature alarm threshold to a proper range.

Replace the heater if an alarm is generated for a faulty heater.

Replace the faulty temperature sensor.

9.5.8 Amb.Over Temp

Possible Causes



The ambient temperature exceeds the upper threshold.



The ambient temperature alarm threshold is not properly set on the monitoring unit.



The temperature sensor is faulty.

Measures

Adjust the ambient temperature alarm threshold to a proper range.

Replace the faulty temperature sensor.

9.5.9 Amb.Under Temp

Possible Causes



Ambient temperature alarm threshold is not properly set on the monitoring unit.



The temperature sensor is faulty.

Summary of Contents for SMU01C























































Search results

Summary of Contents for SMU01C

Reviews:

Related manuals for SMU01C

Brands by name

Popular brands

Huawei SMU01C, User Manual

Search results

Summary of Contents for SMU01C

Reviews:

Related manuals for SMU01C

Brands by name

Popular brands