Remark DSCP af13
Statistic: enable
# Check the configuration of the traffic policy applied on an interface. Here, the configuration
of the traffic policy applied to GE0/0/1 is displayed.
[Switch]
display traffic policy statistics interface gigabitethernet 0/0/1 inbound
Interface: GigabitEthernet0/0/1
Traffic policy inbound: p1
Rule number: 3
Current status: OK!
---------------------------------------------------------------------
Board : 1
Item Packets Bytes
---------------------------------------------------------------------
Matched 10 10000
+--Passed 8 8000
+--Dropped 2 2000
+--Filter 2 2000
+--URPF - -
+--CAR 2 2000
----End
Configuration Files
l
Configuration file of the Switch
#
sysname Switch
#
vlan batch 100 110 120
#
traffic classifier c1 operator or
if-match vlan-id 120
traffic classifier c2 operator or
if-match vlan-id 110
traffic classifier c3 operator or
if-match vlan-id 100
#
traffic behavior b1
car cir 2000 pir 10000 cbs 250000 pbs 1250000 green pass yellow pass red
discard
remark dscp ef
statistic enable
traffic behavior b2
car cir 4000 pir 10000 cbs 500000 pbs 1250000 green pass yellow pass red
discard
remark dscp af33
statistic enable
traffic behavior b3
car cir 4000 pir 10000 cbs 500000 pbs 1250000 green pass yellow pass red
discard
remark dscp af13
statistic enable
#
traffic policy p1
classifier c1 behavior b1
classifier c2 behavior b2
classifier c3 behavior b3
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100 110 120
traffic-policy p1 inbound
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 100 110 120
S3700HI Ethernet Switches
Configuration Guide - QoS
2 Traffic Policing and Traffic Shaping Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74
