The system view is displayed.
Step 2
Run:
interface
interface-type
interface-number
The interface view is displayed.
Or, run:
port-group
port-group-name
The port group view is displayed.
NOTE
You can configure interface-based traffic policing on Ethernet and GE interfaces.
To set the same QoS CAR parameters on multiple interfaces, perform the configuration on the port group
to reduce the workload.
Create a port group before performing this task. For details on how to create a port group, see (Optional)
Configuring a Port Group in the
S3700HI Ethernet Switches Configuration Guide - Ethernet
.
Step 3
Run:
qos lr
{
inbound
|
outbound
}
cir
cir-value
[
cbs
cbs-value
]
Traffic policing is configured on the interface.
----End
2.2.3 Displaying the Maximum Length of a Queue
Traffic policing on the management interface limits the traffic received from the management
interface to improve system performance.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface
meth 0/0/1
The MEth interface view is displayed.
Step 3
Run:
qos lr pps
packets
The rate limit is set.
NOTE
The rate limit of traffic on the management interface cannot be less than 100; otherwise, FTP and Telnet
functions may fail to work.
----End
2.2.4 Checking the Configuration
After interface-based rate limit is configured, you can view rate limit information on the
interface.
S3700HI Ethernet Switches
Configuration Guide - QoS
2 Traffic Policing and Traffic Shaping Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
