42
Selecting the installation position of the grounding clip and stripping off the IF cable sheath with electric
knife without any damage to the shielding layer.
Fixing the grounding clip and waterproofing it. For the waterproofing, see page 48.
The angle resulting from the grounding wire of the clip and the IF cable should not be larger than 15
degrees. When the IF cable is vertically routed, the grounding wire of the clip should be led downwards.
Grounding the IF Cable
b
Grounding the IF Cable - Installing the Grounding Clip
Installing ODU Cables
The ground point at the bottom of the tower is connected to the ground using a U-shaped clamp.
The ground point before being led indoors is fixed on the ground bar at the feeder window using OT
terminals.
