manualshive.com logo in svg

Huawei RRU3931E, Installation Manual

Share
Download
Huawei RRU3931E Installation Manual Download Page 6

1.3 Unpacking Inspection1.3 Unpacking Inspection

This section describes how to unpack and check the delivered materials to ensure that all the
materials are included and intact.

1.4 Obtaining the SN1.4 Obtaining the SN

This section describes how to obtain the serial number (SN) of a RRU3931E. Before
installing the RRU3931E, record its SN for future use during commissioning.

1.5 Installation Process1.5 Installation Process

This section describes the process for installing a RRU3931E. The process includes:

l

Installing a RRU3931E

l

Installing cables

l

Checking the hardware installation

l

Performing a power-on check

1.6 Installing a RRU3931E1.6 Installing a RRU3931E

This section describes the procedure and precautions for installing a RRU3931E.

1.7 Installing Cables1.7 Installing Cables

This section describes the procedure and precautions for installing cables.

en-us_topic_0027706033.xmlen-us_topic_0027706033.xml

This section describes the procedure and precautions for adjusting the installation angles of a
RRU3931E.

1.9 Checking the Hardware Installation1.9 Checking the Hardware Installation

This section describes how to check the hardware installation after a RRU3931E is installed.

1.10 Performing a Power-On Check1.10 Performing a Power-On Check

This section describes the procedure for performing a power-on check on a RRU3931E.

1.11 References1.11 References

This section describes reference information and common operations involved during
installation.

1.1 Changes in RRU3931E Installation Guide

This section describes the changes in 

RRU3931E Hardware Description

.

1.2 Installation Preparations

This section describes the preparations for installation. Before starting the installation, you
must get the installation environment ready, obtain the required reference documents, tools,
and instruments, and familiarize yourself with the skills required.

1.3 Unpacking Inspection

This section describes how to unpack and check the delivered materials to ensure that all the
materials are included and intact.

1.4 Obtaining the SN

This section describes how to obtain the serial number (SN) of a RRU3931E. Before
installing the RRU3931E, record its SN for future use during commissioning.

RRU3931E
Installation Guide

1 RRU3931E Installation Guide

Issue Draft A (2016-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

2

Summary of Contents for RRU3931E
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands