manualshive.com logo in svg

Huawei RRU3260, Installation Manual, Page: 3 / 132

Share
Download
Huawei RRU3260 Installation Manual Download Page 3

About This Document

Purpose

This document describes the process of installing a DC blade RRU3260 (referred to as RRU
in this document).

Product Versions

The following table lists the product versions related to this document.

Product Name

Solution Version

Product Version

DBS3900

SRAN6.0 and later versions

V100R004C00 and later
versions

eRAN2.1 and later versions

V100R003C00 and later
versions

 

Intended Audience

This document is intended for:

Base station installation engineers

Organization

1 Changes in the RRU3260 Installation Guide

This chapter describes the changes in the 

RRU3260 Installation Guide

.

2 Installation Preparations

This chapter describes the reference documents, tools, and instruments that must be ready
before the installation. In addition, it specifies the skills and prerequisites that installation
engineers must have.

3 Information About the Installation

Before installing an RRU, you must be familiar with its exterior, ports, indicators, installation
options and installation clearance requirements.

RRU3260
Installation Guide

About This Document

Issue 10 (2015-12-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

ii

Summary of Contents for RRU3260





































































































































Reviews:

No comments