manualshive.com logo in svg

Huawei RRU3260, Installation Manual, Page: 107 / 132

Share
Download
Huawei RRU3260 Installation Manual Download Page 107

9.6 Installing an RRU RF Jumper

This section describes the procedure for installing an RRU RF jumper.

Procedure

Step 1

Connect the DIN male connector at one end of the RRU RF jumper to the ANT port on the
RRU, and use a torque wrench to tighten the connector to 25 N·m (221.27 lbf·in.), as shown
in 

Figure 9-14

.

Figure 9-14

 Installing an RRU RF jumper

 

NOTICE

On AC-powered electric railways, such as high speed railways, when leaky cables are
connected to RRUs installed in tunnels, high-voltage-resistance DC blocks must be installed
between RRU RF jumpers and the leaky cables to protect the RRUs against damage.

Step 2

Link the other end of the RF jumper to the external antenna system.

Step 3

Waterproof the connectors of the RF jumper by referring to 

Figure 9-15

.

RRU3260
Installation Guide

9 Installing RRU Cables

Issue 10 (2015-12-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

99

Summary of Contents for RRU3260





































































































































Reviews:

No comments