NOTE
l
Before the support is delivered, screws are fastened in the holes silk-screened with 3. When using HD
display 3, you do not need to adjust the support.
l
The left and right sides of the dual-screen HD display support are symmetrical. Therefore, the methods
for adjusting the two sides are the same. The following section uses the left side of the support as an
example.
To adjust the HD display support for the RP200-46S and RP200-55S, perform the following
steps:
Step 1
Remove the screws and washers using an H5 Allen wrench.
Step 2
Partially tighten the screws at the HD display support joints in the holes silk-screened with the
number that matches the HD display you are using.
l
If you are using an RP200-46S, you do not need to adjust the support, as shown in
l
If you are using an RP200-55S, align the holes on the horizontal bars with the holes silk-
screened with 2 on the L and R bars.
Figure 3-12
Adjusting the HD display support
----End
HUAWEI RP100&RP200 Room Presence
Commissioning Guide
3 Installation
Issue 01 (2015-02-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24