Installation Manual
Quidway S3526 Ethernet Switch
Chapter 4 Installation
4-1
Chapter 4 Installation
Note:
On the installation screw of Quidway switches’ chassis, there is an anti-dismantle seal of Huawei
Technologies Co., Ltd
.
The seal must be kept intact before the sales agent performs maintenance to the
switch. Therefore, users should contact local agent for permission if it is necessary to open the chassis,
otherwise, users should bear the responsibility for possible damages.
4.1 Hardware Installation
4.1.1 Installing the Switch in 19-inch Standard Cabinet
The installation procedures are described in the following sections:
Step 1: Check grounding and stability of the cabinet. Fix the angle iron at both sides of
the front panel of the switch with screws.
Step 2: Place the switch on a shelf in the cabinet. Depending on the actual situation,
slide the switch along the guides of the cabinet to an appropriate position. Ensure there
is proper room between the switch and the guides.
Step 3: Use screws to fix the angle irons on the fixing guides at both sides of the cabinet.
Make sure that the switch is securely fixed in the cabinet by the shelf on each slot and
the angle irons.
