Huawei Quidway S3526 Installation Manual Download Page 11

Page: 11 / 72

Installation Manual
Quidway S3526 Ethernet Switch

Chapter 1 Overview

1-1

Chapter 1 Overview

1.1 Brief Introduction to S3526 Switch

Quidway S3526 Ethernet Switch is a layer-2/layer-3 wire-speed Ethernet switching

product delivered by Huawei Technologies Co., Ltd. (hereafter referred to as Huawei).

The switch is of modular design and supports stacking. Based on the VRP (Versatile

Routing Platform) network operating system over which Huawei has independent

intellectual proprietary, Quidway S3526 Ethernet switch can deliver rich routing

protocols, VLAN control, traffic switching, and QoS assurance. The switches provide

matured service control and user management capability.

According to different power supplies, S3526 Ethernet Switch is equipped with two

kinds of chassises, i.e. DC chassis and AC chassis, which have dissimilar power input

sockets.

The switch can be used in the networking of enterprise network, IP MAN (Metropolitan

Area Network) and residential quarter.

The services supported by Quidway S3526 Ethernet Switch include:

Internet broadband access

Networking of enterprise network and campus network

Multicast service and multicast routing functions. Supports multicast Audio/Video

services and VOD services.

1.2 Typical Application of S3526 Switch

The networking of S3526 switches is very flexible. The switch can either be used in the

enterprise network or in the broadband access. Some typical networking modes are

described in the following sections.

1.2.1 Networking of Ethernet Access in Broadband Residential Quarter

In the networking of broadband residential quarter access, S3526 Ethernet switch is

located in the center of the residential quarter. In the downstream direction, the switch

is connected to Ethernet users via Quidway S2403 or Quidway S3026 Ethernet Switch.

In the upstream direction, the switch is connected to the core layer-3 switch via the GE

expansion module slot, and then to the MAN backbone.

Summary of Contents for Quidway S3526









































































Search results

Summary of Contents for Quidway S3526

Reviews:

Related manuals for Quidway S3526

Brands by name

Popular brands

Huawei Quidway S3526, Installation Manual

Search results

Summary of Contents for Quidway S3526

Reviews:

Related manuals for Quidway S3526

Brands by name

Popular brands