Installation Manual
Quidway S3526 Ethernet Switch
Chapter 6 BootROM and Host Software Loading
6-2
6.2.1 Boot Menu
After being powered on, the switch runs the BootROM program first and displays the
following information on the screen:
starting….
************************************************
* *
* Quidway S3526 BOOTROM, Version 2.00 *
* *
************************************************
Copyright(C) 2000-2002 by HUAWEI TECHNOLOGIES CO.,LTD.
Creation date: Oct 26 2001, 16:57:31
CPU type : MPC8240
CPU Clock Speed : 200Mhz
BUS Clock Speed : 33Mhz
Memory Size : 64MB
S3526R001 main board self testing..........................
SDRAM fast selftest......................................OK!
Please check port leds................Led selftest finished!
Flash fast selftest......................................OK!
Switch chip selftest.....................................OK!
CPLD selftest............................................OK!
Port g2/1 has no module
Port g1/1 has no module
PHY selftest.............................................OK!
SSRAM fast selftest......................................OK!
Press Ctrl-B to enter Boot Menu... 5
Press <Ctrl+B>. The system displays:
Password :
Note:
To access the Boot Menu, you should press <Ctrl+B> within five seconds after the information “Press
Ctrl-B to enter Boot Menu...” appears; otherwise the system will start to decompress the program. At this
time if you want to access the Boot Menu, you will have to restart the switch.
Input the correct BootROM password (by default, no password is set on the switch).
The system enters the following Boot Menu:
