29
Management network ports are not initially configured with IP addresses. You can manage the VIS6000
through management network ports only when you assign IP addresses to management network ports by
configuring the configuration network port or the system debugging serial port in the command line
interface (CLI).
Scenario 1: Connecting One End of the Network Cable to the Configuration Port
Scenario 2: Connecting the Serial Port Cable (Convert RJ-45 to DB-9) to the System
Debugging Serial Port
Connecting the VIS6000 to the
Maintenance Terminal
The IP addresses of GE service ports, management network ports, configuration ports, and heartbeat
network ports of controllers cannot be configured in the same network segment.
The IP addresses of the heartbeat ports on controllers are in the 192.168.1.0/24 and 192.168.2.0/24
network segments and cannot be modified.
The IP addresses of the configuration ports are in the 192.168.3.0/24 and cannot be modified.
1 Connecting the Configuration Port or the System
Debugging Serial Port to the Maintenance Terminal
a
Connect One End of the Cable to the Configuration Port or the
System Debugging Serial Port