Huawei OceanStor 18000 V3 Series Features Manual Download

Page: 72 / 196

No.

Configuration
Procedure

Description

Operation Location

Configuration
steps include:
1. Check the

license file.

2. Add a remote

device.

3. Add the

quorum server.

4. Create a

HyperMetro
domain.

5. Create a

HyperMetro
tenant pair.

6. Create a NAS

HyperMetro
pair.

7. (Optional)

Create a Qtree.

8. (Optional)

Create a quota.

9. (Optional)

Create a
snapshot.

Describes how to check
the HyperMetro license,
add a remote device and
quorum server, and
create a HyperMetro
domain, HyperMetro
tenant pair, and NAS
HyperMetro pair.

1. Check the license file. This

operation is performed on both
the local and remote storage
arrays.

2. Add a remote device. This

operation is performed on the
local storage array.

3. Add the quorum server. This

operation is performed on both
the local and remote storage
arrays.

4. Create a HyperMetro domain.

This operation is performed on
the local storage array.

5. Create a HyperMetro tenant

pair. This operation is
performed on the local storage
array.

6. Create a NAS HyperMetro

pair. This operation is
performed on the local storage
array.

7. Create a Qtree. This operation

is performed on the local
storage array.

8. Create a quota. This operation

is performed on the local
storage array.

9. Create a snapshot. This

operation is performed on both
the local and remote storage
arrays.

4.2 Configuration Preparations

This section describes prerequisites and documents that you must prepare before you
configure HyperMetro.

Prerequisites for configuring HyperMetro are as follows:

All devices have been installed.

The IP/Fibre Channel network is working properly between the two data centers.

Storage units have been deployed at a third-place quorum site.

If other features besides HyperMetro need to be configured for the storage system, see
the

Impact and Restrictions

section about the interaction among features.

OceanStor V3 Series
HyperMetro Feature Guide for File

4 Configuration

Issue 05 (2018-01-30)

Huawei Proprietary and Confidential

Summary of Contents for OceanStor 18000 V3 Series





































































































































































































Search results

Summary of Contents for OceanStor 18000 V3 Series

Reviews:

Related manuals for OceanStor 18000 V3 Series

Brands by name

Popular brands

Huawei OceanStor 18000 V3 Series, Features Manual

Search results

Summary of Contents for OceanStor 18000 V3 Series

Reviews:

Related manuals for OceanStor 18000 V3 Series

Brands by name

Popular brands