Install the GPS feeder by connecting one end
of the feeder to the Surge interface of the
lightning protection component and the other
end to the GPS antenna. Use the wrench to
secure the joint.
5
Implement 1+3+3 waterproof protection. Use
one cable tie on each end of the tape to
secure the adhesive tape.
•Implement waterproof protection for the
feeder-and-lightning-protection-surge joint.
•Implement waterproof protection for the
feeder-and-GPS-antenna-N joint.
Insert the AE 905S into an optical interface of
the NE08E device, with the wrench on the AE
905S being locked.
Connect the other end of the coaxial cable to
the AE 905S.
The coaxial cable must be routed without affecting the
cabling of neighboring boards.
Do not connect the coaxial cable to any AE 905S
inserted into an optical interface adjacent to another
optical interface with an optical attenuation module.
Wrap one layer
of insulation
tape.
Wrap three layers
of waterproof
tapes.
Wrap three layers
of insulation
tapes.
Use one
cable tie on
each end.
For requirements on the GPS feeder joint production,
see
GPS Satellite Antenna System Quick
Installation Guide
.
NOTE
NOTE
