2
Introduction to the ATOM GPS
Before inserting an AE 905S to an optical interface, lock the
ejector lever. Before removing an AE 905S from an optical
interface, loosen the ejector lever.
Although the AE 905S can be inserted into an optical
interface, it cannot be installed on an NED1EG2 board.
If you need to install two AE 905Ss on a device, separately
installing them on the optical interfaces of two boards is
recommended. If you need to install two AE 905Ss on the
same board, inserting the modules at an interval of at least
four optical interfaces is recommended.
Loosen the ejector lever.
a
Indoor NE08E (Example:NE08E-S6)
AE 905S
b
10
Optical interface
Alarm interface
Power supply interface
Clock interface
Time interface
Antistatic jack interface
Optical interface
NM interface
(Console interface)
PGND point
Electrical interface
Lock the ejector lever.
NOTE
10
