Huawei MU739 Hardware Manual Download Page 79

Page: 79 / 89

HUAWEI MU739 HSPA+ LGA Module

Hardware Guide

Certifications

Issue 01 (2011-08-24)

Huawei Proprietary and Confidential

modified in the integrated equipment. For this reason, the antennas and the USIM

card interface circuits need to be re-tested in the overall-system certification.



Field test

The antenna performance-relevant field test is required due to changes in the

antennas and to test the equipment

s functions and its interoperability with

networks on five networks run by different European operators. To be specific,

the field test tests the basic functions of the UE on actual networks and

determines whether the UE passes the testing according to the UE performance.



SIM/USIM test

USIM card interface circuits are re-designed in the integrated equipment, which

may result in changes in the electrical features of the USIM card interface. For

this reason, the USIM card interface circuits need to be re-tested. The SIM/USIM

test aims to verify the overall performance of SIM/USIM interface with appropriate

test instruments in accordance with the relevant 3GPP protocol requirements.

Huawei provides a test report of the product to be certified for the customers who

require the GCF certification. The test report is issued by an organization designated

for GCF certification. The test report covers the Protocol Implementation

Conformance Statement (PICS) and the test information on the product. The PICS is

a conformance statement of the product and a basis for GCF certification. The test

information includes the performed test items and results of the product. The test

organization can issue a certification report of the integrated equipment after

performing the required field test and SIM/USIM test based on the test report provided

by Huawei.

Terminal manufacturers who apply for the GCF certification of the terminals to be

integrated with Huawei modules must accomplish the following tasks:

1. Register as a member of the GCF.

The GCF certification is a DOC. Only GCF members can submit their DOC on the

GCF website. Contact the GCF if you need to join the GCF. Proceed with the

following steps if you are a GCF member.

2. Choose a test organization.

The GCF does not designate its test organizations. All test organizations that

meet the GCF test conditions can perform GCF tests. In this case, it is necessary

for manufacturers to choose a well-recognized test organization that provides

high quality and high efficiency services. The global test organizations 7layers,

SGS, and CETCOM are recommended. The recommended test organizations

have built various labs all around the world and work closely with the GCF and

the PTCRB. Therefore, the test organizations are able to provide high quality and

high efficiency test services and are widely recognized by operators.

3. Discuss test details with the test organization.

Provide the test organization with the test report of Huawei modules and the

modifications of the integrated equipment. The test organization then can

determine the detailed test items and determine the test schedule accordingly.

With the detailed test items and schedule, terminal manufacturers can determine

accurate plans of product development and marketing.

4. Perform overall-system certification.

The integrated equipment can pass the over-all certification test easily if Huawei

design suggestions are complied with.

5. Obtain the test report and the DOC.

draft2

Summary of Contents for MU739


























































































Search results

Summary of Contents for MU739

Reviews:

Related manuals for MU739

Brands by name

Popular brands

Huawei MU739, Hardware Manual

Search results

Summary of Contents for MU739

Reviews:

Related manuals for MU739

Brands by name

Popular brands