Connecting using mobile data
Before using mobile data, ensure that you have a data plan with your network provider to
avoid incurring excessive data charges. Mobile data is not supported on Wi-Fi only tablets.
1
Swipe down from the status bar to open the notification panel.
2
Touch
to enable mobile data.
Disable mobile data when not required so as to save battery power and reduce data
usage.
Charging your device
Your device displays a low battery warning when the battery is nearly empty. Charge your device
immediately to prevent it from switching off automatically.
Using a charger to charge your device
Connect your device to a socket using the factory-provided charger and USB cable.
l
If your device does not respond when you press the power button, the battery is probably
empty. Charge your battery for at least 10 minutes (use the charger that came with your
device), and then restart your device.
l
Your device automatically conducts a safety check when you connect it to a charger or
other devices. If your device detects that the USB port is wet, it will automatically stop
charging and display a safety message. If this message is displayed, unplug the USB
cable from your device and allow the USB port to dry out completely to avoid damaging
your device or battery.
Getting Started
3
Summary of Contents for MediaPad M3 Lite 10
Page 1: ...User Guide MediaPad T3 ...
Page 4: ...Legal Notice Contents iii ...
