Huawei LUNA2000 Series User Manual Download

Page: 91 / 96

Step 5 Hold down the black start button for 5s to activate the battery. The power control

module LED blinks three times and then the green indicator is steady on. The

battery comprehensive LED blinks three times and then the green indicator is

steady on. The ring LED blinks three circles.

Step 6 Connect the FusionSolar app to the inverter, choose Maintenance > Battery

maintenance > Recharge, start battery recharge, and monitor the charge status

of the lithium battery in real time until the recharge is complete.

Step 7 Confirm that the recharge is complete if five indicators of the ring LED are on and

the comprehensive LED of the battery expansion modules is steady green.

Step 8 After the battery is charged, switch off the inverter input AC circuit breaker and

then the battery input circuit breaker. If other batteries need to be charged, repeat

the preceding steps.

----End

LUNA2000-(5-30)-S0

User Manual

7 System Maintenance

Issue 01 (2020-10-20)

Summary of Contents for LUNA2000 Series

































































































Search results

Summary of Contents for LUNA2000 Series

Reviews:

Related manuals for LUNA2000 Series

Brands by name

Popular brands

Huawei LUNA2000 Series, User Manual

Search results

Summary of Contents for LUNA2000 Series

Reviews:

Related manuals for LUNA2000 Series

Brands by name

Popular brands