manualshive.com logo in svg

Huawei LUNA2000 Series, User Manual

Share
Download
Huawei LUNA2000 Series User Manual Download Page 39

Parameter

Description

Value Range

Backup power

SOC

Sets the backup power SOC. In grid-tied

mode, the battery does not discharge when

it is discharged to the backup power SOC.

When the grid fails, loads are powered in

backup mode.

[0, 50%]

Grid-tied/Off-

grid mode

switching

If this parameter is set to Automatic

switching, the system switches to the off-

grid mode when the grid fails, and switches

to the grid-tied mode when the grid

recovers.

● Automatic

switching

● Manual

switching

Setting a Working Mode

The grid-tied and off-grid ESS mode can be used together with the self-

consumption or time-of-use mode. Enable Off-grid mode during site deployment.

For details about how to set the self-consumption or time-of-use mode, see 

3.1.2

Setting the Grid-tied ESS Mode

.

3.3 Pure Off-grid ESS

The pure off-grid ESS is mainly used in the scenario where there is no grid and the

system operates in pure off-grid mode. The pure off-grid ESS stores the generated

PV energy in batteries and supplies power to loads when the PV energy is

insufficient or there is no PV energy at night.

3.3.1 Pure Off-grid ESS Networking

The pure off-grid ESS consists of the PV strings, LUNA2000 batteries, inverter, AC

switch, and load. In off-grid mode, PV strings and batteries must be configured.
The pure off-grid ESS supports only a single inverter and does not support parallel

connection of inverters.

LUNA2000-(5-30)-S0

User Manual

3 Application Scenarios and Settings

Issue 01 (2020-10-20)

Copyright © Huawei Technologies Co., Ltd.

33

Summary of Contents for LUNA2000 Series

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands