background image

1

Safety Precautions

To use the device properly and safely, read the safety precautions carefully before using the device 

and strictly observe these precautions when using the device.

 

„

Keep the device away from large heat source equipment, bare flames, and high-power 

devices, such as electric heaters, candles, and blow drier, to eliminate safety risks.

 

„

If there are aged cables or power socket facilities on the power supply line to or near the 

device, replace them in time to eliminate safety risks. The power supply voltage of the device 

must meet the input voltage requirement.

Safety precautions:

 

„

Keep the device out of the reach of children as the components or accessories may be 

swallowed.

 

„

The power supply voltage of the device must meet the requirements on the input voltage of the 

device.

 

„

Do not use any power adapters that are not in the standard configuration. Otherwise, the 

device may be abnormal or unsafe.

 

„

If the power adapter is damaged and its internal circuit is exposed due to man-made factors, 

do not touch the exposed circuit, which may bring safety risks.

 

„

Prevent objects, such as metal, from entering the device through the heat dissipation hole.

 

„

Dry your hands before connecting or disconnecting cables. Stop the device and switch off the 

power before connecting or disconnecting cables.

 

„

Switch off the power and disconnect all cables, including the power cable, and network cable, 

during periods of lightning activities. The socket-outlet shall be installed near the power adapter 

and shall be easily accessible. Before use the power adapter, please check no damage on the 

adapter. 

 

„

Do not install telephone lines, network cables, power adapters or power adapter cables 

outdoors. Adopting these measures will help prevent device damage and bodily injuries which 

are especially prone during thunderstorms.

 

„

Install the device according to the requirements of the manufacturer. To be specific, reserve 

at least 10 cm for heat dissipation at the top and four sides of the device, keep the device 

away from flammable objects, highly magnetic or electric devices, such as microwave ovens, 

refrigerators, and mobile phones.

 

„

Do not place any object on the device, so that the device will not be damaged due to 

overheating or deformation.

 

„

If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and 

smell, stop the device immediately, switch off the power, disconnect all cables (such as the 

power cable, and network cable) to the device, and contact the authorized service center.

 

„

Do not disassemble the device without permission. In the case of a device fault, contact the 

authorized service center.

 

„

Dispose of the packing materials, expired batteries, and old or abandoned devices in 

accordance to local laws and regulations (recycling them is strongly recommended).

 

„

Do not change the structure, safety design, or performance design of the device without prior 

authorization.

Fireproof precautions:

Summary of Contents for LS1015
















Reviews: