Huawei IVS1800 User Manual Download Page 49

Page: 49 / 63

Step 4 Modify the IP address for the IVS1800.

1. Choose Local Configuration > Server configuration. Set the service IP

address (internal IP address of the IVS1800), time zone, and time according to

the site requirements.

Figure 4-25 Configuring the server (Single Mode by default)

NO TE

Set Business IP to XXX.XXX.XXX.XXX, Subnet mask to 255.255.255.0, and Gateway IP

to XXX.XXX.XXX.XXX. The values here are examples. The actual value prevails.

2. Change the PC IP address to an address in the network segment of the new

IVS1800 IP address, enter the IVS1800 IP address in the address box of the

Internet browser, and log in to the OMU portal system.

3. (Optional) Configure the NTP synchronization. After setting The NTP clock

source server to Yes, set the IP address of the NTP server.

NO TE

Currently, the IVS1800 and NTP source server must be in the same LAN for NTP

synchronization. For details, see

If the IVS1800 and the NTP source server are not in the same LAN, you need to

manually set the time as follows: Choose Local Configuration > Server configuration

and change Timezone config and Time config based on the time of the source server

to be synchronized.

4. Choose Maintenance > Unified Configuration, set Module Name to MU,

and click Search.

5. In the search result, click Edit in the row where the value of Parameter Name

is MUNNatIP and set Value to the external IP address of the IVS1800. Click

Save.

IVS1800 Video Management System

User Manual

4 Commissioning the IVS1800

Issue 02 (2021-01-27)

Summary of Contents for IVS1800
































































Search results

Summary of Contents for IVS1800

Reviews:

Related manuals for IVS1800

Brands by name

Popular brands

Huawei IVS1800, User Manual

Search results

Summary of Contents for IVS1800

Reviews:

Related manuals for IVS1800

Brands by name

Popular brands