User Manual
iSiteC BTS3601C CDMA Base Station
BTS Maintenance
Chapter 1 O&M System Overview
1-6
l
The management of BTS object includes the creation, deletion, query and
modification of BTS information. To create a BTS is to register a BTS and
configure for it the basic maintenance information, including BTS name and
maintenance IP address.
l
The start information management aims at BTS BOOTP (member of TCP/IP
family) information. For BAM to manage BTSs, it is necessary to establish the
BAM-BTS O&M links. As the result, it is necessary to configure the information
including the No. of the optical interface for the O&M links, the Virtual Path
(VP)/Virtual Circuit (VC) Nos. of Asynchronous Transfer Mode (ATM) links, etc.
l
The data backup management is the operations related to the backup of BTS
configuration data. To send the BTS configuration data for backup, the storage
path and file name should be set with this function, with the suffix of the file name
as "bin". The BTS just reset will request BAM for configuration data. If the data
have been backed up, BAM will retrieve them and send them directly to the BTS
rather than configure them again.
Figure 1-5
BTS networking
III. Micro-BTS loading management
Figure 1-6 shows the BTS loading management function. This function is provided only
by the remote maintenance console, not by the near one.
The micro-BTS loading management involves the various operations over the software
loading information, as well as the up/downloading of configuration data, and the
downloading/activation of the software. Please note that the target path for uploading
and source path for the downloading are those set in the "Data Backup Management"
of "BTS Networking".
