User Manual
iSiteC BTS3601C CDMA Base Station
System Description
Chapter 1 System Overview
1-4
l
It supports various configuration modes like S(1/1) and S(1/1/1) through
cascading ODU3601Cs.
l
For optical transmission, it supports chain and ring networking modes.
Configuration and networking details are available in "3.7 Configuration and
Networking"
&
Note:
To meet the actual implementation requirements, the external E1 interface of BTS3601C can be
confiured as the T1 interface. Unless otherwise specified, the following description about E1 interface is
also applicable to T1 interface.
III. Support for multi-bands
BTS3601C supports 450MHz and 800MHz bands, therefore, it can be applied in the
450MHz communication system and the 800MHz communication system.
IV. Hierarchical power supply
If the BTS3601C is equipped with a 40AH storage battery, it can keep working
normally for 1 hour after the AC power is broken off, then the power amplification
module will be switched off, and the BTS can maintain transmission for another 8
hours.
V. Easy installation
Featuring small size, light weight and mains supply, BTS3601C does not require an
equipment room or air conditioner. It neither requires a special tower as it can be
easily installed on a metal post, stayed tower or on the wall. All these can reduce the
site construction cost without affecting the network quality.
VI. Excellent protection performance
Equipped with built-in power supply unit, temperature control unit and equipment
monitoring unit, it can be applied in any severe environment.
BTS3601C is dust-proof, anti-burglary, water-proof, damp-proof. With its protection
performance in compliance with the IP55 (IEC 60529: Degrees of protection provided
by enclosure), it operates normally in different whether conditions.
